Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Hollis
Chimney repair in Hollis usually starts with the same phone call: a homeowner spots crumbled mortar on the stack between the houses, or a loose brick that wasn’t loose last fall. We serve Hollis homeowners who want a straight answer about what their chimney actually needs before anyone touches it. Our technicians have up to 9 years of experience reading the wear patterns that older Hollis masonry shows, and we work with a curated lineup of professional-grade materials from DuraFlex, HeatShield, and Copperfield. A clean chimney is a safe chimney, and we make sure you have both. Call (844) 871-3169 for a free estimate.

Why Hollis Homeowners Call Elmhurst Chimney Sweep for Chimney Repair
Hollis is full of detached single-family homes with original fireplaces, and the brick stacks that rise between them have been standing for 70 to 90 years. That means most repair calls here aren’t about a new chimney. They’re about aging masonry that was never built for today’s heating appliances, and about clay liners that have cracked through decades of freeze and thaw. We’ve built our reputation in Hollis on telling homeowners what their chimney actually needs, nothing more and nothing less.
What sets our work apart is evidence. We don’t recommend liner work, crown repair, or a rebuild without showing you camera footage of the flue interior first. You see what we see. If your chimney can safely wait another season, we’ll say so. When we do restore a flue, we use HeatShield ceramic resurfacing or a DuraFlex liner system, the same professional-grade materials used by certified chimney professionals nationwide. Our technicians have up to 9 years of experience, and we bring that focus to every Hollis job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Hollis
Every repair we do falls inside a single focused trade: chimney and fireplace. That means the person who inspects your Hollis stack is the same specialist who repoints it, waterproofs it, and confirms the work with a follow-up sweep. Here is what we handle most often in Hollis.
Mortar Repointing
Freeze-thaw cycling is the main enemy of Hollis mortar joints. Winter moisture works into hairline cracks, expands, and pushes the joint apart; by spring the mortar has turned to sand in places. Repointing replaces those failed joints with fresh mortar, but the key is matching the mix to the original brick so the repair doesn’t trap moisture or spall the face. We cut out the loose material to the right depth and rebuild the joint, not just smear mortar over the surface.
Spalling Brick Repair
Spalling is when the face of a brick flakes off, usually after years of trapped moisture. On Hollis homes you’ll often see it on the external stacks that catch the weather on one side. Individual spalled bricks can be replaced or, where the damage is broader, the affected section rebuilt with matching units. We check the cause first, because a brick that spalls once will spall again if the water source isn’t addressed.
Chimney Waterproofing
A breathable masonry waterproofing keeps rain out of the brick without sealing it so tightly that moisture gets trapped inside. For a Hollis chimney that has already weathered decades of humid summers and cold winters, waterproofing is one of the most cost-effective steps you can take to slow further deterioration. We apply it after any repointing work has cured, so the joints are sound before the surface is protected.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the first place roof leaks show up around a stack. In Hollis’s older homes the original flashing is often thin, corroded, or simply lifted away from the masonry. We repair or rebuild the flashing seals so water runs off the roof instead of down the inside of the chimney chase. A small flashing repair now often prevents a much larger masonry job later.
Trusted Brands We Service in Hollis
We work with professional-grade materials that chimney specialists rely on across the country. DuraFlex covers liner systems for full relining and restored draft. Copperfield and Olympia Chimney supply the cap and crown components built specifically for chimney applications, and HeatShield is our choice for ceramic resurfacing of a compromised flue. Because we standardize on these materials, we can move from inspection to repair without sending you to a second vendor. One specialist handles the full system: inspection, cleaning, repair, and crown. If your Hollis chimney needs a part we don’t carry, we source it and schedule the work.
Common Chimney Repair Problems We See in Hollis Homes
The repair pattern in Hollis differs from most suburban neighborhoods because the housing stock and the way the chimneys sit on the lot are different. Here are the problems we see most.

- Clay-tile liners cracked by freeze-thaw. Original liners on Hollis homes have cycled through decades of winters, and the cracks often get misread as simple creosote buildup. That can lead to a brush cleaning when what’s actually needed is liner repair.
- Shared brick piers leaking between houses. On many Hollis blocks the stacks rise between adjacent homes as shared masonry piers. When one flue deteriorates, smoke or carbon monoxide can migrate through unsealed party-wall brickwork into a neighbor’s attic.
- Seized dampers and rusted firebox hardware. Hollis’s hot, humid summers rust older metal dampers and firebox hardware. A damper that won’t open sometimes gets mistaken for a chimney that needs a full rebuild.
- Spalling exterior brick and open mortar joints. External stacks that take the weather on one face are the usual candidates. Repointing and waterproofing usually address it before a rebuild is needed.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Hollis, NY
Repair pricing in Hollis comes down to the size of the job and the condition of the masonry. A typical mortar repointing on a single external stack runs roughly $350 to $900. Spalling brick repair typically runs $300 to $1,200 depending on how many units need replacing. Chimney waterproofing generally runs $250 to $600, and flashing repair runs about $200 to $500. Full rebuilding of a deteriorated stack is a much larger project, and we quote it in writing after the inspection.
We work from a written estimate, and the price is set per job. Nothing gets recommended without camera evidence you can see for yourself, and if the work can safely wait, we’ll tell you. The estimate itself is free.
We Also Serve Cities Near Hollis
We regularly work with homeowners in the neighborhoods around Hollis, including Fresh Meadows, Briarwood, Kew Gardens, and Forest Hills. The housing stock and climate are similar, so the repair approach carries over. If you’re near Hollis and need chimney repair, call us and we’ll schedule a visit. For a full look at our chimney repair services, start here.
Serving Hollis, NY – Our Local Coverage Area
We serve Hollis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Hollis
You can’t tell from the ground; a cracked clay-tile liner needs a camera inspection of the flue interior to confirm. Cracks that show up after freeze-thaw cycling are common in Hollis’s older homes, and small fissures are easy to miss from a visual look at the firebox. We run a camera and show you the footage so you see the same evidence we do. Call (844) 871-3169 for an exact quote, estimates are free.
Because many Hollis blocks have shared brick piers between houses, a deteriorated flue in one home can let smoke or carbon monoxide migrate through uncapped party-wall masonry into a neighbor’s attic. That’s a pattern you rarely see in newer subdivisions where each chimney stands alone. If your neighbor’s smoke shows up in your attic or walls, it’s worth a look at both flues.
Often yes, when the damage is limited to individual bricks or a section of the stack. Spalling brick repair replaces the failed units and addresses the moisture source that caused them, and repointing handles loose joints around them. A rebuild is only warranted when the core of the stack has failed. Call (844) 871-3169 for an exact quote, estimates are free.
Chimney waterproofing keeps rain out of the brick and slows the freeze-thaw damage that cracks mortar and spalls brick faces in Hollis. A breathable coating protects the masonry without trapping moisture, which is the main risk of sealing a chimney improperly. It’s usually the last step after repointing, once the joints are sound. Call (844) 871-3169 for an exact quote, estimates are free.
It can be, even when the fireplace is only used a few times a year. Glazed third-degree creosote builds where heat and limited draft combine, and it’s harder to remove than the soft stage. That’s one reason a routine sweep often turns into an informal inspection of spalling brick and cracked tiles. Call (844) 871-3169 for an exact quote, estimates are free.
Schedule Chimney Repair in Hollis
If your Hollis chimney has loose mortar, cracked tiles, or a stack that’s been weathering decades of freeze-thaw, we can look and tell you what it needs. We start with a camera inspection, show you what we find, and only recommend the repair your chimney actually needs. Call (844) 871-3169 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Elmhurst Chimney Sweep.