Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Hollis
If you’re in Hollis and your chimney needs a look, we inspect the full flue, firebox, damper and exterior stack, then give you a written report you can hold in your hand. Most Hollis inspections are booked within a few days, and we work around the no-nonsense way people here like to get things done. The older homes on these blocks deserve a specialist who understands what they’re made of – our technicians have up to 9 years of experience and treat a Hollis chimney like the piece of history it usually is. Call (844) 871-3169 for a free estimate.

Why Hollis Homeowners Call Elmhurst Chimney Sweep for Chimney Inspection
We’re a chimney and fireplace specialist, not a general contractor who sweeps chimneys on the side. That matters in a neighborhood where the fireplaces are original and the stacks are older than most of the people using them. When we come out to a Hollis home, we’re looking at brickwork, flue condition, mortar joints and appliance connections as one system, because that’s how a chimney actually fails.
We work with a curated lineup of professional-grade brands – HeatShield, DuraFlex and Olympia Chimney among them – the same materials certified chimney specialists lean on. And we tell you what your chimney actually needs. Nothing more, nothing less. On a Hollis block, that often means pointing out what can safely wait as clearly as what can’t. Our scheduling reaches Hollis quickly, so you’re not waiting a week for a technician to show up and glance up a flue.
Homeowners here treat chimney maintenance as a safety issue. They want a knowledgeable specialist and straight answers, and that’s exactly what we aim to give every time we’re called to a Hollis address.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Hollis
An inspection is the starting point for everything else. It tells us what your chimney is and what it needs before anyone talks about cleaning, lining or repair. In Hollis we lead with camera work and the deeper inspection levels, because aging masonry here rewards a closer look.
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts – the firebox, damper, visible flue and any appliance connections – without going onto the roof or probing behind anything. It’s the right call when nothing has changed and your chimney has been serviced regularly. In Hollis we still test the damper and check for visible spalling, because “accessible” doesn’t mean “worth skipping.”
Level 2 Inspection
A Level 2 inspection goes further: it includes the roof-side view of the stack and crown, and – critically here – a video camera run through the flue. Hollis homes built in the 1920s through the 1950s often have deteriorated clay-tile liners or no liner at all, and you can’t judge those from the firebox. The camera is what separates a real recommendation from a guess.
Level 3 Inspection
A Level 3 inspection is for a specific, known concern – a cracked flue after a chimney fire, a major structural question, or masonry that has to be opened up to be assessed. It’s not routine, and we won’t propose it unless the evidence points there. If a Level 2 shows something that needs closer access, we’ll explain why, in plain terms.
Camera Inspection
This is the backbone of what we do in Hollis. A camera run through the flue shows the actual condition of the liner, the mortar joints and the appliance connections – no guesswork. When a homeowner worries they’re being told to pay for a reline they don’t need, the camera footage is the answer. You see what we see.
Trusted Brands We Service in Hollis
When repair or relining is part of the conversation, the brands we work with are chosen for chimney applications specifically. DuraFlex liner systems restore safe draft and fire containment. HeatShield ceramic resurfacing can rebuild a compromised flue interior instead of replacing it outright. Gelco and Olympia Chimney components are what we look for on caps and crowns built to last. We don’t claim to stock parts or keep a warehouse full of them – what we do is know these products inside out and match the right system to your Hollis chimney’s actual condition. The goal is fast, correct turnaround without guesswork.
Common Chimney Inspection Problems We See in Hollis Homes
Some of what we find here is stubbornly specific to the neighborhood’s housing stock and climate.

- Clay-tile liners cracked by freeze-thaw cycles. Hollis winters freeze and thaw repeatedly, and that cycling cracks the clay tile in old flues. Many inspectors skip the camera and recommend a full reline off a visual glance – which hides the real extent of spalling and misses chimneys that are candidates for HeatShield resurfacing instead.
- Shared brick piers between neighboring houses. On many blocks the chimney stacks rise as shared party-wall piers. Unsealed shared masonry can leak smoke or carbon monoxide into a neighbor’s attic – a condition that rarely exists in detached suburban chimneys and that a Level 1 inspection never checks for.
- Appliances vented into stacks never designed for them. Original single-flue chimneys were built for open fireplaces; many now vent gas furnaces or water heaters, and the camera often shows improper appliance connections.
- Rusted dampers and firebox hardware. Summer humidity here rusts older metal dampers so they stick open or closed. If an inspection only looks up the flue and never tests the damper, you find out on the first cold night when smoke backs up.
The Hollis Chimney Problem You Won’t Read Anywhere Else
On many Hollis blocks, the brick chimney stacks aren’t freestanding – they’re shared party-wall piers rising between adjacent houses. That single detail changes what a chimney inspection here has to include. A deteriorated flue in one home can leak smoke or carbon monoxide into the neighbor’s attic through masonry that was never capped or sealed. Technicians routinely find creosote-stained party-wall brickwork where nothing separates one home’s exhaust from the next. A Level 1 inspection that never checks party-wall joints or attic-side brickwork entirely misses this cross-contamination risk. That’s why camera evidence and a proper roof-side look matter so much on this page: nothing gets recommended without footage you can see yourself. Serving Hollis means knowing the houses are built this way.
A typical job in these 70 – 90-year-old detached homes starts small: a homeowner spots spalling brick or a cracked clay-tile liner during a routine cleaning. The camera then reveals first-degree creosote and deteriorated mortar joints that need repointing before a flue liner can be properly assessed. Because original chimneys were built as single-flue stacks for open fireplaces but now vent gas furnaces or water heaters, the inspection often turns up improper appliance connections and rusted dampers. The usual fix is a HeatShield or DuraFlex liner system sized to the current appliance, after the existing flue’s condition is documented on camera. A clean chimney is a safe chimney – we make sure you have both.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Inspection in Hollis, NY
We keep inspection pricing straightforward, and the written estimate sets the final price. A typical Level 1 chimney inspection in Hollis runs $150 – $250. A camera-based Level 2 inspection, which is what most of these older Hollis homes need, runs $250 – $450. A Level 3 inspection, where access has to be opened up, runs $450 – $900. Relining or cap work, if the camera shows it’s needed, is quoted separately and never added without documentation. What affects the range is the inspection level, roof access and whether appliances are connected. Examine the evidence before the dollars, and book a free estimate; our chimney inspection team answers questions up front.
We Also Serve Cities Near Hollis
Hollis sits close to a handful of neighborhoods we cover regularly. If you’re just outside the target area, we also serve Fresh Meadows, Briarwood, Kew Gardens and Forest Hills, and the same camera-first approach carries over. The housing stock differs block by block, but the principle holds: nothing gets recommended before you’ve seen the evidence yourself.
Contact Us for a Free Chimney Inspection Estimate in Hollis
If your Hollis chimney hasn’t been looked at in a while, or a neighbor’s flue worries you as much as your own, the next step is simple. Call (844) 871-3169. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a clear report, camera evidence where it matters, and a written estimate that sets the final price before any work begins.
Serving Hollis, NY – Our Local Coverage Area
We serve Hollis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Hollis
A camera inspection shows the inside of your flue and can reveal cracked tiles and failed mortar where leakage starts, but it can’t see into your neighbor’s attic. That’s why we pair the camera with a roof-side look at the shared party-wall brickwork, and why the footage matters before anything is recommended. Call (844) 871-3169 for a free estimate.
You typically need a Level 2 when your clay-tile liner is old or unknown, when appliances are vented into the flue, or when the stack is shared with a neighbor. Those conditions are common in Hollis’s 1920s – 1950s homes, and a Level 1 can’t see inside the flue. When in doubt, the camera settles it. Call (844) 871-3169 for a free estimate.
A Level 2 inspection includes the roof-side view of the crown, so it will catch spalling and cracking. If the crown needs repair or replacement, that’s within our scope using Gelco, Famco or Olympia Chimney components – no second vendor required. We’ll document it and quote it in the written estimate. Call (844) 871-3169 for a free estimate.
Yes. Damper operation is part of every inspection we do, including Level 1. Summer humidity here rusts older metal dampers so they stick open or closed, and you don’t want to discover that on the first cold night. We test it and tell you what it needs. Call (844) 871-3169 for a free estimate.
It depends on what the camera shows, and that’s exactly why we run it. Heavy creosote sometimes calls for specialized cleaning, while a failed or cracked liner needs relining with DuraFlex or resurfacing with HeatShield. You see the footage before any recommendation. Call (844) 871-3169 for a free estimate.
Written by the team at Elmhurst Chimney Sweep.