Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Corona
If you live in Corona, NY, you already know the housing here is old, tight, and packed with character. If smoke smells off, if the brick is crumbling, or if you’ve noticed staining on the chimney, you’ve come to the right place. We provide chimney repair in Corona with the kind of local knowledge you only get from working in this specific setting, and we answer 24/7 at (844) 871-3169. We’re close by in Elmhurst, so getting to your block is straightforward. We work on the brick, mortar, and crown that Corona’s older homes actually have. You’ll get a free estimate before anything starts.

Why Corona Homeowners Call Elmhurst Chimney Sweep for Chimney Repair
We work in Corona often, and we understand its blocks. The homes are a dense mix of two- and three-family rowhouses, mostly built between 1900 and 1940. Their chimneys are original, and they rarely have modern liners. Nearby, the 7 train rumbles along Roosevelt Avenue, and the streets around Flushing Meadows Corona Park are packed with these buildings. We know how tightly they’re built and how carefully you have to work on a party-wall chimney. That’s why we always inspect before we recommend a repair. We want to show you the real problem rather than push a large job. You’ll get a written estimate, and the price is set per job.
Our technicians have up to 9 years of experience. They’ve seen plenty of the spalling, cracked mortar joints, and water intrusion these early-20th-century brick chimneys deal with. From the crown down to the firebox, we handle the whole system. We also carry the professional-grade brands other chimney specialists trust. When a flue needs relining, for example, we use DuraFlex, HeatShield, or Olympia Chimney. That matters here because shared flues make every repair a little more delicate.
Chimney repair in a place like this isn’t a generic job. It takes care. That’s our focus.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Corona
Mortar Repointing
Corona’s humid summers and freeze-thaw winters wear down mortar joints fast. You’ll see mortar flaking or receding, especially on the chimney crown and exterior brick. We remove the loose material and repoint with fresh mortar that matches the older brick. On a party-wall chimney, this is often step one. Repointing lets us seal the structure and spot deeper cracks before they reach the flue.
Spalling Brick Repair
Spalling is what happens when trapped water forces the face of the brick to pop off. In Corona’s dense rowhouses, this is common on the chimney’s exposed side. We replace the damaged brick with matching units and check the surrounding mortar for similar wear. Leaving spalling untreated lets water seep further in. That’s how flue liners and dampers eventually rust out.
Chimney Waterproofing
Heavy spring rains can find every crack in a 100-year-old chimney. Waterproofing seals the masonry against rain without trapping moisture inside. We use a breathable coating so the brick can still dry out. On a Corona chimney with shared flues, sealing the exterior brick also limits the paths water uses to reach the interior. It’s one of the most effective ways to slow the damage we see here.
Flashing Repair
Flashing sits where the chimney meets the roof, and in Corona’s narrow side yards it’s often the first thing to fail. A gap in the flashing lets water run down the chimney chase. That erodes mortar, rusts the damper, and can soak into the shared brickwork. We repair the flashing and check the roof junction from every angle we can reach. If the flashing is beyond repair, we rebuild it with proper materials from Gelco or Famco.
Trusted Brands We Service in Corona
When a Corona chimney needs a liner, a cap, or a crown, we work with the brands chimney specialists use nationwide. HeatShield ceramic resurfacing restores a compromised flue interior without a full tear-out, which suits these older party-wall stacks well. DuraFlex liner systems restore safe draft and fire containment in shared flues. For caps and crowns, Gelco, Famco, and Olympia Chimney make components engineered specifically for chimney work. We don’t need to special-order around you; we schedule the work and arrive with the right materials. One specialist for the full system means you won’t be calling a second trade.
Common Chimney Repair Problems We See in Corona Homes
- Shared flue tiles that crack. In these attached rowhouses, one stack often serves two or three apartments. A cracked tile lets smoke or carbon monoxide drift from one unit into another. By the time a neighbor smells it, the tile is usually already split.
- Spalling from freeze-thaw cycles. Corona’s winters push water into the original brick and mortar joints, then freeze it. The face of the brick pops loose, opening a path for more water to reach the flue liner.
- Leaking flashing at narrow side yards. Tight roofs and crowded walls mean flashing is hard to inspect and easy to ignore. Spring rain gets in at the roof-wall junction and runs down the chase, wearing at mortar and rusting dampers.
- Crumbling crowns on 1920s chimneys. The original crowns were thin and didn’t last. Ours get rebuilt with proper slope and material so water sheds instead of pooling on top.
Pricing for Chimney Repair in Corona, NY
Chimney repair here usually runs from a few hundred dollars for repointing small sections to several thousand for a full rebuild on an original party-wall stack. Here’s what a typical repair costs in Corona:
- Mortar repointing, per section: $250 to $600
- Spalling brick repair: $300 to $800
- Chimney waterproofing: $250 to $500
- Flashing repair: $300 to $700
- Full chimney rebuild: $3,000 to $8,000
- HeatShield or DuraFlex relining of a shared flue: $1,500 to $4,000
The estimate is free, and the written estimate sets the final price. We never recommend work you don’t need. If the test shows the chimney simply needs repointing and waterproofing, that’s what we quote.

See the difference
Before
After
Before
After
Before
AfterWhy Party-Wall Chimneys Need Special Attention
In Corona’s attached brick rowhouses, the chimney stack often sits on the party wall between units. That means a repair on one side can open a path for smoke or carbon monoxide to migrate into the neighboring unit through unlined or cracked flue tiles. Technicians confirm this by reading the smoke-staining patterns on shared brickwork. A dark patch on one side of a chimney that shouldn’t be venting tells you which flue is leaking. In a dense block near Northern Boulevard, a repair on one unit can’t safely be done without checking the other side. That’s how we approach every job here.
Here’s how a typical repair plays out in these homes. A second-floor tenant notices a smoky odor when the first-floor furnace runs, and it traces back to a cracked flue tile in a shared stack. The work starts with a Level 2 inspection to map flue isolation. We then reline the affected flue with a HeatShield or DuraFlex liner and repoint the spalling mortar joints on the crown and exterior brick. Because the chimney is original and often lacks a modern liner, we verify that the damper and firebox are sealed from the neighboring unit’s flue. Waterproofing finishes the job. This is the standard order of work here, not a special case.
We Also Serve Cities Near Corona
Corona borders several other Queens neighborhoods where the housing stock is just as old and dense. We handle chimney repair in nearby Elmhurst, Rego Park, Jackson Heights, and East Elmhurst as well. If you’re in any of these areas and your chimney needs attention, we can help. You can also read more about our work across Corona and the surrounding communities.
Serving Corona, NY – Our Local Coverage Area
We serve Corona and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Corona
Yes, it usually is. A smoky odor from a neighbor’s furnace in a Corona rowhouse typically points to a cracked flue tile in a shared stack. The flue tiles in these buildings often connect between apartments, and a crack lets smoke or carbon monoxide drift across. A Level 2 inspection can map the flue isolation and find the break. Call (844) 871-3169. We answer 24/7.
It crumbles because the original crown was thin and wasn’t built to shed water properly. These early-20th-century chimneys often have crowns that absorb rain, then crack during a freeze-thaw cycle. A rebuilt crown with proper slope and material fixes it. Call (844) 871-3169 for a free estimate.
Yes, we can. We’ve worked on some of the tightest side yards in Corona, and we access the roof-wall junction carefully with ladders and safe techniques. Narrow spacing doesn’t stop a reliable flashing repair, though it does call for the right approach. Call (844) 871-3169 for an exact quote.
The difference comes down to how deep the damage goes. Repointing handles surface mortar that’s flaking or washing away; a rebuild is needed when the brick itself has failed or the stack has lost structural integrity. An inspection tells you which one your chimney needs. Call (844) 871-3169 for a free estimate.
We use DuraFlex, HeatShield, Olympia Chimney, Gelco, Famco, and Copperfield. These are the same professional-grade materials used by chimney specialists nationwide. For shared flues in Corona, DuraFlex and HeatShield are the most common choices. Call (844) 871-3169 for an exact quote – estimates are free.
Same-Day Repair and What Happens When You Call
Chimney damage has a way of getting worse between a leak and the repair. When you call us at (844) 871-3169, we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We don’t do voicemail runarounds.
Our Professional Chimney Craftsmanship in Corona
The homes in this neighborhood were built to last, and they deserve chimney work that matches. A clean chimney is a safe chimney, and we make sure you have both. Call us at (844) 871-3169 for a free estimate. We’ll tell you what your chimney actually needs, nothing more and nothing less.
Written by the team at Elmhurst Chimney Sweep.