Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Hollis
If your fireplace has been idle for a season, or a smoky smell drifts into an upstairs closet every time you light a fire, you’re reading the right page. We sweep chimneys in Hollis with one guiding principle: nothing gets recommended until there’s camera footage you can see for yourself. That matters in a neighborhood where most chimneys are older than the appliances vented into them. Call (844) 871-3169. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

We know Hollis, which means we arrive expecting a 70- to 90-year-old brick stack, a clay-tile liner that’s seen better decades, and a homeowner who wants straight answers rather than a big-ticket sales pitch.
Why Hollis Homeowners Call Elmhurst Chimney Sweep for Chimney Sweep
Elmhurst Chimney Sweep is a chimney and fireplace specialist, not a generalist who sweeps on the side. Every job we take, from a routine chimney sweep to a crown rebuild, sits inside a single focused trade. Hollis homeowners tell us that’s the difference they noticed: our technicians have up to 9 years of experience, and they work exclusively on chimneys and fireplaces rather than jumping between trades.
Local knowledge builds real trust here. On Hollis blocks where stacks rise between neighboring houses, we know to check the party-wall brick for creosote staining before a brush ever touches the flue. That kind of detail doesn’t come up in a generic cleaning. Our technicians work with the same professional-grade materials certified chimney specialists rely on, including DuraFlex liner systems and HeatShield ceramic resurfacing.
We respond throughout Hollis 11423 and the surrounding blocks, and we give you the problem straight. If your chimney only needs a sweep, we’ll say so. If it needs repair, we’ll show you exactly why on camera.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Hollis
Hollis chimneys need more than a brush-and-go visit. Here’s how we handle the work that matters most in this neighborhood.
Level 2 Inspection
A Level 2 inspection is a camera-based look at the full flue, and in Hollis it’s the inspection that counts. We thread a camera down the stack to document cracked clay tiles, spalling joints, and any gap where a neighbor’s masonry meets yours. Nothing gets recommended from a glance at the brick pier.
Creosote Removal
Creosote is what builds up when a fireplace sees occasional light use, which is very common in Hollis. Where the deposit is glazed or tar-like, a standard brush won’t cut it, and we use specialized removal methods rather than leaving a dangerous layer behind. If the flue is unlined or crumbling, we size and guide our brushes carefully so we don’t grind loose mortar into the smoke chamber.
Annual Sweep
An annual sweep is the simplest safety habit for a Hollis fireplace, and it’s how we keep an eye on masonry that’s been through decades of freeze-thaw cycles. During the sweep, we note the condition of the damper, firebox hardware, and cap so small problems get caught before they turn into repairs.
Soot Removal
Soot builds up quietly in summer humidity and cold winters alike. We remove it from the firebox, smoke chamber, and flue, with containment throughout the home so the job doesn’t leave a layer of dust on your furniture. It’s a focused trade, and it shows in the finish of the work.
Trusted Brands We Service in Hollis
When a Hollis chimney needs a cap, a crown, or a reline, we use the professional-grade materials certified chimney specialists rely on. Our repair and installation work uses components from Gelco, Famco, and Olympia Chimney for caps and crowns, and DuraFlex liner systems where a full reline restores safe draft and fire containment. We don’t stock parts – we order the right component for your chimney rather than forcing what’s on hand. Every material decision is explained up front so you understand what’s going into your stack and why.

Common Chimney Sweep Problems We See in Hollis Homes
The same four issues come up again and again in this neighborhood, and they’re why sweeping here is really aging-masonry work.
- Unlined or failed clay-tile flues. Many stacks here were never built for today’s heating appliances, and a deteriorated liner lets smoke and carbon monoxide escape into the masonry. That’s a serious safety concern, so we always run a camera first and show you the footage before recommending a reline.
- Shared brick piers between neighbors. On blocks where stacks rise between adjacent houses, a single cracked flue can push smoke or carbon monoxide through the shared masonry into the next attic. We check the party-wall brick for creosote staining before we sweep.
- Freeze-thaw mortar damage. Hollis sits in a humid continental climate with cold winters, so mortar joints and clay liners crack year after year. That weathered masonry needs a careful, camera-guided touch rather than a heavy hand.
- Summer humidity and rusted hardware. Hot, humid summers rust older metal dampers and firebox hardware and let water work into freeze-thaw cracks in the stack. A sound cap and crown keep that moisture out.
See the difference
Before
After
Before
After
Before
AfterThe Shared-Wall Problem Unique to Hollis Blocks
Here’s what makes a Hollis call different: on many blocks the chimney stacks rise between neighboring houses, so one unlined or cracked flue can push smoke and carbon monoxide through the shared masonry into the adjacent attic. That means sweeping here often starts with checking the party-wall brick for creosote staining before anything is brushed. It’s a detail a generalist will miss. Smoke backing up in an upstairs closet, or a faint smell in a storage room, can trace back to masonry shared with the house next door rather than your own firebox.
We also respect the age of these homes and the industry’s worst habit of upselling them. Nothing is recommended without camera evidence you can review, and where a liner has failed, we explain the HeatShield or DuraFlex reline option only after you’ve seen the footage. When work can safely wait, we tell you that too.
Pricing for Chimney Sweep in Hollis, NY
A typical annual chimney sweep in Hollis runs $180 – $340 depending on flue size, creosote level, and how easily the stack can be accessed. A Level 2 camera inspection usually runs $250 – $450. Creosote removal on a heavier, glazed deposit runs $350 – $700, and a chimney cap or crown installation depends on the component and stack condition. Here’s a quick line-item view:
- Annual sweep: $180 – $340
- Level 2 inspection: $250 – $450
- Creosote removal (heavy/glazed): $350 – $700
- Soot removal and fireplace cleaning: $200 – $400
These are estimates, and the written estimate sets the final price. Weather-worn masonry and shared-wall access can shift the number, and we’ll say so before booking. Call (844) 871-3169. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Hollis
Hollis isn’t the only corner we cover. We also sweep chimneys in Hollis and the surrounding neighborhoods, including Fresh Meadows, Briarwood, Kew Gardens, and Forest Hills. Wherever your home sits, the same camera-first approach applies. Call (844) 871-3169. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Hollis, NY – Our Local Coverage Area
We serve Hollis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Hollis
Not necessarily, and you shouldn’t accept a reline quote without seeing the camera footage first. An unlined or failed clay-tile flue is common in Hollis, but whether it needs a reline depends on what the camera shows: cracked tiles, spalling joints, or gaps that let smoke escape. We show you the footage and let you review it, then explain whether a DuraFlex reline or HeatShield resurfacing is the right path. Call (844) 871-3169 for an exact quote – estimates are free.
On many Hollis blocks the chimney stacks rise between adjacent houses, so a cracked or unlined flue can push smoke and carbon monoxide through shared masonry into the next attic or your own upstairs closet. That’s why we check the party-wall brick for creosote staining before brushing. It’s a shared-wall issue a generalist sweep can miss. Call (844) 871-3169 and we’ll inspect and document it.
NFPA 211 calls for an annual inspection and cleaning of a chimney, and that holds even for a fireplace you only light a few times a season. Occasional use still builds creosote and still lets summer humidity rust the damper and firebox hardware. In older Hollis stacks, the annual visit is also when we catch freeze-thaw cracks early. Call (844) 871-3169 – estimates are free.
First-degree creosote is a light, flaky soot a standard brush removes, while third-degree glazed or tar-like creosote is baked on and needs specialized removal. Second-degree is the crusty middle ground. In Hollis, occasional fires tend to leave light deposits, but a neglected flue can carry glaze a brush alone won’t cut. Call (844) 871-3169 and we’ll tell you which you have before any work is booked.
Yes. Hot, humid Hollis summers rust older metal dampers and firebox hardware, and a missing or damaged cap lets water in to open freeze-thaw cracks in the stack. That’s why our annual sweep includes a look at the cap, crown, and hardware. A sound cap and crown keep the moisture out. Call (844) 871-3169 for a free estimate – we tell you what your chimney actually needs, nothing more.
Written by the team at Elmhurst Chimney Sweep.