Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Forest Hills
If you live in a 1920s or 1930s Tudor or Colonial here, your chimney is likely older than everyone on your block and has probably been through an oil-to-gas conversion, a boiler swap, or a new insert along the way. That history matters, because one quick brush-down rarely tells the whole story. We’re a chimney-only specialist serving Forest Hills, and we look at the whole system: every flue, the smoke chamber, the crown, and the firebox. Call (844) 871-3169. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Forest Hills Homeowners Call Elmhurst Chimney Sweep for Chimney Sweep
Most of the work we do in Forest Hills comes down to old houses and newer heating setups that don’t quite agree with each other. A chimney that vented oil for forty years now handles gas, and the change shows up as acidic condensate attacking soft lime mortar and single-wythe clay tiles. We build our recommendations around that reality rather than a generic checklist.
Forest Hills homeowners tend to ask better questions than most: what did the camera actually see, what’s the creosote stage, does this flue need a liner or just a clean. We like that. We use the same professional-grade materials – DuraFlex, HeatShield, Copperfield – that certified chimney specialists rely on, and we tell you what your chimney actually needs, nothing more and nothing less. Our technicians have up to 9 years of experience on Forest Hills flues, corbelled stacks, and multi-fireplace layouts.
The written estimate sets the final price, and nothing gets recommended that you can’t see for yourself on the inspection report. We’re a focused chimney trade, not a general contractor sweeping on the side, which means inspection, cleaning, cap and crown, liner work, and firebox repair all fall to one team.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Forest Hills
For larger Forest Hills properties with more than one appliance venting, the annual routine needs to be per-flue, not per-house. Here’s how each service fits.
Level 1 Inspection
A Level 1 visit covers the readily accessible parts of the chimney: the firebox, damper, flue from the top and bottom where reachable, and the crown and cap. For a Forest Hills house that’s used lightly and hasn’t changed appliances, this is often the annual check. When a property has several flues, we won’t tell you one Level 1 covers them all.
Level 2 Inspection
A Level 2 inspection adds a camera run through the flue and a closer look at the smoke chamber, and it’s what a 1920s Forest Hills house usually deserves after a gas conversion, an insert install, or a boiler change. Camera evidence is the whole point. You see the cracked tile or softened mortar yourself, and you get a photo report along with the recommendation. This is the inspection most multi-chimney Forest Hills homes actually need.
Creosote Removal
Oil-to-gas conversions in these old Forest Hills Tudors and Colonials often leave glazed third-degree creosote and acidic condensate eating at the original lime mortar, and a surface brush won’t touch that. We remove first- and second-degree creosote with standard rotary tools and address the glaze with proper chemical methods. Where creosote has combined with a failing tile, the honest answer may be a HeatShield ceramic rebuild rather than another brush-down.
Soot Removal
Soot builds up in the smoke chamber and the flue shoulders, and in a firebox where mortar has softened, a brush can pull grit as it goes. We clear soot from the chamber, firebox, and damper area and clean up behind ourselves. On a Forest Hills house with a decorative firebox surround, we work carefully around the original masonry so nothing gets chipped.
Trusted Brands We Service in Forest Hills
When repair work comes up, the materials matter as much as the labor. We work with a curated lineup: DuraFlex for stainless flue liners, HeatShield for ceramic flue resurfacing, Gelco and Olympia Chimney for caps and crown components built specifically for chimney applications. Those are the same materials certified chimney professionals use nationwide. We don’t stock parts locally, so if a custom cap or a sized liner is what your stack needs, we order it, and turnaround stays quick because it’s the only thing we’re waiting on. From the crown down to the firebox, every product is chosen for chimney work, not borrowed from another trade.
Common Chimney Sweep Problems We See in Forest Hills Homes
- One sweep, three flues. Homeowners here often assume the annual sweep covered the second fireplace and the gas boiler flue. It didn’t. A house with two fireplaces and a boiler needs each flue scoped and lined on its own terms.
- Off-the-shelf caps on a corbelled stack. A standard galvanized cap screwed onto a 1920s corbelled brick top either looks wrong or fails to seal the crown, and freeze-thaw water gets in through the gap. That’s why we fabricate stainless caps that mimic the original profile.
- Glazed creosote after gas conversion. Acidic condensate from modern gas and oil appliances eats the original lime mortar that a surface brush can’t address. The glaze needs chemical treatment or a resurfaced flue.
- Spalling crowns and cracked tiles. Forest Hills sits in a humid continental climate with hard winters and frequent freeze-thaw cycles. Brickwork spalls, crowns crack, and unlined flues from 1920 to 1940 rarely hold up to it.
Why Multi-Flue 1920s Homes in Forest Hills Need More Than One Sweep
This is the part of Forest Hills that shapes our work more than anything else. The neighborhood’s 1920s and 1930s Tudors and Colonials were built with soft, lime-rich mortar and single-wythe clay flues, and many have been converted from oil to gas, which produces more acidic condensation and accelerates deterioration of older mortar and flue tiles. A house like that typically has two fireplaces plus a boiler flue, and each one needs its own Level 2 camera inspection before anyone declares the chimney “clean.”

Forest Hills Gardens adds a further constraint. Its blocks were developed under a design review regime that still governs exterior alterations, so chimney caps and stack repairs generally have to match the original corbelled brick profile rather than take a stocked galvanized cap. That’s why we regularly custom-fabricate stainless liners and caps that mimic the original design – something the nearby Rego Park and Kew Gardens row houses rarely require. Preserving the roofline while retrofitting a code-compliant liner is a specific skill, and it’s one we’ve built on these Forest Hills stacks.
Here’s how a typical multi-chimney job usually runs. In a 1930s Tudor or Colonial with an oil-to-gas conversion, the original clay flue tiles behind a cast-iron damper often show spalling and cracked joints, and the firebox mortar has softened to the point a brush pulls grit. A qualified sweep runs a Level 2 inspection with a camera, brushes or rods through the flue, removes first- and second-degree creosote from the smoke chamber, and then quotes a HeatShield or stainless flue liner sized to the appliance – sometimes custom-fabricated to sit inside the historic stack without changing the roofline.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Forest Hills, NY
You deserve real numbers, so here are the typical ranges we quote in the Forest Hills area. The written estimate you get in writing is what sets the final price, and the estimate itself is free.
| Service | Typical Forest Hills range |
|---|---|
| Annual sweep (single flue) | $180 – $300 |
| Level 1 inspection | $120 – $250 |
| Level 2 inspection with camera | $250 – $450 |
| Creosote removal (beyond routine) | $200 – $500 |
| Custom stainless cap matching corbelled stack | $350 – $800 |
| HeatShield flue resurfacing (per flue) | $1,500 – $4,000 |
Cost lands higher when a house has multiple flues, a corbelled stack that needs a fabricated cap, or glaze that requires chemical treatment. It lands lower when a single flue is straightforward, accessible, and hasn’t been altered. You’ll get the flat price before booking, with the camera report to justify it.
We Also Serve Cities Near Forest Hills
Our coverage of Forest Hills reaches out to the surrounding communities too. We serve Rego Park, Kew Gardens, Corona, and Middle Village on the same schedule: flat pricing, camera inspection, and a photo report with every visit. The chimney sweep team serving these blocks knows how each neighborhood’s housing stock differs, and we plan the visit accordingly.
Serving Forest Hills, NY – Our Local Coverage Area
We serve Forest Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Forest Hills
No. A single sweep covers one flue. A 1930s Forest Hills Tudor with two fireplaces and a gas boiler flue has three separate flues, and each one needs its own inspection, cleaning, and – where the tile has cracked – its own liner decision. We’ll scope all three in one visit so you know exactly what each flue needs. Call (844) 871-3169 for a flat price.
Yes. We fabricate stainless caps and size liners to match the original corbelled brick profile that the design review regime protects, rather than forcing a galvanized stock cap onto the stack. The exterior stays the same. The liner and cap do the safety work. Estimates are free, and we’ll show you the options before any work is agreed.
Yes, conversion makes deterioration faster. Gas appliances produce more acidic condensate than oil, and that condensate attacks the soft lime mortar and single-wythe clay tiles in 1920s – 1940s Forest Hills houses. It shows up as spalling and cracked joints that a brush can’t reach. Call (844) 871-3169 and we’ll camera the flue and tell you what’s actually there.
Once a year for each flue, plus a Level 2 camera inspection any time an appliance changes or a fireplace sits unused for a long stretch. In a Forest Hills house with two fireplaces and a boiler, that means each flue gets its own annual check. A camera report every few years catches tile failure before it becomes a liner job. Call for a flat price on an inspection today.
Third-degree creosote is glazed, shiny, and hardened onto the flue, and no, a brush won’t remove it. It forms from acidic condensate in Forest Hills conversions and needs chemical treatment or, where the tile has failed, a HeatShield resurface. We photograph it before recommending anything. Estimates are free – call (844) 871-3169.
Book a Chimney Sweep in Forest Hills
If your Forest Hills house has more than one flue, or it’s been a while since anyone looked inside the chimney with a camera, the right move is a Level 2 inspection before the heating season – not after. A clean chimney is a safe chimney, and we make sure you have both. Call (844) 871-3169 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Elmhurst Chimney Sweep.