Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Forest Hills
Fireplace repair in Forest Hills usually starts with a flue problem you can’t see: an original clay liner that’s cracked, a damper that no longer seats, or a smoke chamber glazed with old creosote. We’re a chimney-and-fireplace specialist, not a general handyman outfit, and we handle both the venting system and the firebox as one integrated unit. Our technicians have up to 9 years of experience, and we work with the same professional-grade materials – DuraFlex, HeatShield, Olympus-grade caps – that certified chimney specialists rely on across Queens. For a house with more than one stack, that full-system view matters. Call (844) 871-3169.

Why Forest Hills Homeowners Call Elmhurst Chimney Sweep for Fireplace Repair
Forest Hills is full of large, older properties, and most of them have more than one fireplace and more than one flue in a single stack. That’s a different job than a single-flue ranch. Cross-contamination between flues and deteriorated mortar joints tend to go unnoticed until someone runs a Level 2 inspection camera down the stack. Our fireplace repair service covers gas and wood-burning fireboxes, inserts, dampers and pilots, so you’re not juggling three vendors for one chimney.
We know this neighborhood’s housing. The 1920s – 1930s Tudors and Colonials along the winding streets of Forest Hills Gardens and the adjacent blocks were built with ornate, corbelled brick tops that a standard off-the-shelf cap won’t fit. The same freeze-thaw cycles that crack the crowns also work on the soft, lime-rich mortar of the original stacks. We can work with your neighbors’ recommendations and the reputation we’ve built doing this specific kind of restoration work. What we won’t do is quote liner or masonry work you can’t verify. Nothing gets recommended without camera evidence you can see for yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Forest Hills
Our technicians have up to 9 years of experience across all of the following. HeatShield ceramic resurfacing is available where a flue interior is compromised but not yet ready for a full reline.
Gas Fireplace Repair
Many Forest Hills homes have been converted from oil to gas, and the new appliance’s acidic condensate is harder on the original clay flue than the old fuel was. If your gas fireplace smells off, won’t light reliably, or the pilot keeps going out, the problem is often in the venting as much as the burner. We inspect both.
Wood Burning Fireplace Repair
Second- and third-degree creosote often glazes the smoke chamber and damper area in a wood-burning fireplace that’s seen decades of use. That glaze has to be treated chemically or rotaried out before a new damper can be fitted and seated properly. We handle that whole sequence instead of just sweeping around it.
Fireplace Insert Service
An insert that’s running poorly is usually a sizing or sealing issue, not a worn-out unit. In a Forest Hills house with a masonry chimney, an insert needs to connect to a properly sized liner – DuraFlex liners are the professional standard for restoring safe draft and fire containment. We’ll tell you whether the insert can stay or needs replacing.
Damper Repair
A damper that won’t close tightly is a draft problem and a heat-loss problem at the same time. In these older fireboxes the damper often corrodes into the frame and can’t be simply pulled out. We assess whether it can be repaired in place or needs replacement without tearing into the firebox.
Trusted Brands We Service in Forest Hills
We work with a curated lineup of professional-grade suppliers: DuraFlex for stainless liners, HeatShield for ceramic flue resurfacing, and Gelco and Olympia Chimney for caps and crown components. You’ll see DuraFlex and Olympia mentioned most often on the liner work in Forest Hills Gardens because the custom-fabricated pieces hold up under the original corbelled profile. We don’t carry inventory on a truck – parts are ordered to spec once we’ve measured your stack, and turnaround is quick once the order’s in.

Common Fireplace Repair Problems We See in Forest Hills Homes
- Cracked clay liners after an oil-to-gas conversion. The acidic condensate from a gas appliance eats through the original clay tile, causing spalling and unsafe draft. A qualified local pro typically runs a Level 2 inspection, installs a correctly sized stainless liner, and rebuilds the crown to match the historic exterior.
- Corbelled brick tops that reject standard caps. The decorative tops on hundreds of Forest Hills Gardens chimneys can’t be capped with an off-the-shelf unit without ruining the profile. Custom-fabricated stainless caps are the usual fix.
- Cross-contamination between flues. Multiple flues in one stack can leak exhaust from one appliance into another. Only a Level 2 camera inspection catches it.
- Cracked crowns from freeze-thaw. Forest Hills sits in a humid continental climate with cold winters, and the repeated expansion and contraction of masonry cracks the crown and spalls the brickwork. Left alone, that’s a water-entry problem into the flue.
This is why Forest Hills chimney repair so often comes down to architecture rather than just wear. Generic guides won’t cover it. The corbelled tops, the multiple flues, and the oil-to-gas conversions in this neighborhood demand custom sizes and custom-fabricated pieces.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Forest Hills, NY
Pricing here runs higher than in Queens neighborhoods with newer, simpler stock, because the work on 1920s – 1930s stacks is rarely off-the-shelf. A typical damper repair in Forest Hills runs $180 – $340. A gas or wood-burning fireplace diagnostic and tune-up runs $150 – $280. Fireplace insert service runs $250 – $450, and a full stainless liner installation with a custom cap runs $2,400 – $6,500 depending on the number of flues and the stack height. HeatShield ceramic resurfacing runs $1,200 – $2,800. What moves the price up is the number of flues in a stack, the degree of corbelled detail, and whether the crown needs rebuilding. The written estimate sets the final price – the estimate is free, and you’ll see the camera footage before we recommend anything.
We Also Serve Cities Near Forest Hills
We work with homeowners throughout Forest Hills and the surrounding Queens neighborhoods: Rego Park, Kew Gardens, Corona, and Middle Village. The same 1920s – 1940s housing stock shows up across all of them, and the chimney work runs into the same problems. If you’re just outside our Forest Hills coverage, call and we’ll confirm.
Serving Forest Hills, NY – Our Local Coverage Area
We serve Forest Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Forest Hills
Once a year, and every time you change what you’re burning. A house with two or three flues in one stack needs a Level 2 camera inspection annually, because cross-contamination and deteriorated mortar joints don’t announce themselves. If you’ve converted oil to gas since the last inspection, book one before the next burning season. Call (844) 871-3169 to schedule – estimates are free.
A correctly sized stainless liner, usually DuraFlex or Olympia Chimney, installed after a Level 2 inspection, with a rebuilt crown to preserve the historic exterior. The original clay tiles rarely hold up once acidic condensate from a converted appliance gets into them, so patching is usually a waste of money. The pro will show you the crack on camera before recommending anything. Call (844) 871-3169 for an exact quote – estimates are free.
Usually yes. In most 1920s – 1930s fireboxes the damper corrodes into the frame but the firebox itself is sound, so the damper assembly can be repaired or replaced in place. The exception is heavy creosote glazing around the smoke chamber, which has to be cleared first. Call (844) 871-3169 to have it assessed.
Because the decorative brick profile is irregular, and a standard cap either won’t fit or will look like a mistake on top of a 1920s stack. Custom-fabricated stainless caps are made to mirror the original top so the house keeps its exterior character while getting proper rain and animal protection. Call (844) 871-3169 for a quote.
Weak draft, smoke rolling into the room when you open the door, a glass panel that soots up quickly, or a fire that struggles to stay lit. In a masonry chimney, that usually points to a liner sizing or sealing problem rather than a worn-out insert. Call (844) 871-3169 and we’ll diagnose it on site.
Book a Forest Hills Fireplace Repair
If your fireplace hasn’t been inspected since the oil-to-gas conversion, or the damper won’t seat and smoke backs into the room, call us. We answer 24/7, fast dispatch from 7am to 7pm Sunday through Friday, and we’re closed on Saturday. Call (844) 871-3169 for a free estimate. One specialist for the full system: inspection, cleaning, repair, and crown.
Written by the team at Elmhurst Chimney Sweep.