Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Elmhurst Homeowners
Most chimney problems in Elmhurst start quietly: a hairline crack in the flue tile, a crown that’s pulling away from the brick, creosote building up in a flue that hasn’t been looked at in years. None of it shows from the street or the living room. Our technicians have up to 9 years of experience and carry the same professional-grade equipment the trade relies on, so an inspection here is more than a flashlight up the flue. We book same-day inspections when the schedule allows. Call (844) 871-3169.
What Our Chimney Inspection Service Includes
An inspection is the starting point for everything else we do, so we size it to the question you actually have. Sometimes that means a quick look before the heating season. Sometimes it means a full camera record you can hand to a buyer or an insurer. Here’s how each level works.
Level 1 Inspection
A Level 1 inspection is a visual check of the readily accessible parts of the chimney and venting system, including the firebox, damper, and flue from the top and bottom. It’s the right choice when your setup hasn’t changed and you just want to know the chimney is sound before you use it. We check for creosote buildup, blockages, and visible damage, then tell you plainly whether the chimney is ready to burn.
Level 2 Inspection
A Level 2 inspection adds a camera run through the flue and a closer look at the attic and any accessible crawl spaces. You’ll want it after a chimney fire, when you change appliance types, or when you buy or sell a home. We document what the camera finds and show you the footage, so no one has to take our word for a recommendation.
Level 3 Inspection
A Level 3 inspection goes into concealed areas of the chimney when the lower levels turn up something they can’t resolve. It’s reserved for suspected damage inside a wall, a hidden flue issue, or a problem nothing else explains. We explain what the extra access will involve before we touch anything, and we only recommend it when the evidence points there.
Camera Inspection
A camera inspection runs a video camera down the full length of the flue so we can see the interior of the tile or liner end to end. It catches cracks, gaps, offset joints, and missing mortar that a visual check from the firebox can’t reach. We record the run and share the footage with you, so the photo report is yours to keep and compare later.
Flue Inspection
A flue inspection focuses on the channel itself: its size, its condition, and whether it’s clear enough for the appliance venting into it. It matters most when draft feels weak, smoke backs up, or you’ve noticed soot where it shouldn’t be. We check for creosote glaze, obstruction, and liner integrity, then tell you whether a sweep or a repair comes next.
Real Estate Inspection
A real estate inspection is a Level 2 done specifically for a sale or purchase, with the documentation a transaction needs. It gives the buyer a clear picture of the chimney’s condition and gives the seller a defensible record of what was found. We put the findings, the photos, and the recommended work in writing so both sides can work from the same facts.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We work with a curated lineup of professional-grade chimney brands, the same ones certified specialists use across the country. When we inspect a DuraFlex liner system, we know where the seams and joints tend to wear and what a compromised connection looks like on camera. HeatShield is a name we see regularly in restored flues, and we know how to check a ceramic resurfacing job for gaps or bond failures before we sign off on it.
Gelco and Olympia Chimney components turn up often on cap and crown work, and we inspect those assemblies for the rust, cracks, and loose fasteners that let water into a chimney. Whether your chimney has a DuraFlex liner, a HeatShield restoration, Gelco or Olympia Chimney parts, or any other make, we can help.
Signs You Need Chimney Inspection Right Now
- Smoke backing into the room. Draft problems usually trace to a blockage, a cracked flue, or a flue that’s too small for the appliance. It’s uncomfortable at best and worth a proper look before you burn again.
- Creosote buildup you can see or smell. If the firebox walls or flue look glossy or heavily coated, you’re running a fire risk that a sweep can address. A chimney fire feeds on exactly that buildup.
- Water stains, rust, or chimney odor. Staining on the ceiling or a rusty damper points to a failed crown, cap, or flashing letting water in. Small leaks get into the masonry and get worse over time.
- A chimney fire happened, even a small one. Many chimney fires go out on their own and are never noticed, but they leave cracked tiles and damaged liner behind. A camera inspection tells you what’s actually left.
- You bought the house without records. You don’t know when the chimney was last swept or what work was done. One inspection gives you a baseline and a written record to work from.
Our Chimney Inspection Process – Step by Step
- 1
We start with a conversation. We ask how you use the fireplace, when it was last serviced, and whether you’ve noticed anything odd. That shapes which level of inspection fits your situation, and it keeps you from paying for more than you need.
- 2
We protect the work area. Drop cloths go down around the hearth and anywhere we’re working. Chimney work is dusty by nature, and there’s no reason it should end up on your floors.
- 3
We do the visual and camera checks. We inspect the firebox, damper, flue, crown, cap, and flashing from top and bottom, then run a video camera down the flue. We look for cracks, gaps, obstructions, and liner damage that a flashlight can’t catch.
- 4
We show you what we found. You see the photos and camera footage yourself, in plain terms, before any work is discussed. If something can safely wait, we say so.
- 5
You get a written photo report and estimate. The report lays out the condition of the system and any recommended work, and if repairs are needed, the written estimate sets the final price.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Elmhurst?
A typical Level 1 chimney inspection in Elmhurst runs $100 – $175, while a Level 2 with camera inspection runs $175 – $375 depending on how the chimney is built and what the camera shows. A Level 3 inspection, which opens up concealed parts of the chimney, runs $400 – $900 based on how much access is needed. Real estate inspections fall in the same range as a Level 2, since they follow the same procedure. Fireplace repair and chimney repair are quoted separately once the inspection tells us what’s involved. Our written estimates are free, and the written estimate sets the final price.
What affects the price: the level of inspection, the length and construction of the flue, whether we can reach the roof easily, and whether the camera finds something that needs a closer look. To avoid overpaying, ask upfront which level you’re getting and why, and ask to see the camera footage before agreeing to any work. Every inspection we do includes a camera record you can review yourself. That’s the whole point: you shouldn’t have to take anyone’s word for a crack in a flue you can’t see.
Chimney Inspection Near Elmhurst – Our Service Area
We book chimney inspections throughout Elmhurst and the surrounding Queens neighborhoods, including Rego Park, Middle Village, Glendale, Kew Gardens, Briarwood, Fresh Meadows, Whitestone, Howard Beach, Hollis, Corona, and Jackson Heights. If you’re in one of these areas and want a clear picture of your chimney’s condition, a visit like our chimney inspection can be booked for a day that suits you. We answer 24/7 and dispatch crews Sunday through Friday, 7am to 7pm.
Serving Elmhurst, NY – Our Local Coverage Area
We serve Elmhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Elmhurst
A chimney inspection is an assessment of the chimney and venting system to check for blockages, creosote buildup, cracks, and other damage. It can range from a visual check to a camera inspection of the full flue, depending on what your situation calls for. The goal is a clear, documented picture of whether the chimney is safe to use. Call (844) 871-3169 to book one.
A Level 1 inspection usually takes about 30 to 45 minutes, while a Level 2 with camera inspection typically runs 60 to 90 minutes. A Level 3 takes longer because it involves access to concealed areas. We’ll tell you the expected time when you book. Call (844) 871-3169 to schedule.
Chimney inspections in Elmhurst typically run $100 – $175 for a Level 1, $175 – $375 for a Level 2 with camera, and $400 – $900 for a Level 3 depending on access. The written estimate sets the final price. Call (844) 871-3169 for a free estimate.
Yes, we inspect DuraFlex liner systems and check the seams, joints, and connections where they tend to wear. We also work with HeatShield, Gelco, and Olympia Chimney components on the repair side. Call (844) 871-3169 to book an inspection.
Yes, we book same-day inspections when the schedule allows. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (844) 871-3169 to see what’s available.
We stand behind the quality of our inspections and repairs, and we include a camera record and photo report so you can see the findings for yourself. We don’t make blanket warranty claims we can’t stand behind. If something isn’t right, we’ll talk it through with you. Call (844) 871-3169 with any questions.
Clear the area around the hearth and make sure we can reach the firebox and, if needed, the roof access. If you have service records or know when the chimney was last swept, have them ready. That’s about all you need to do. Call (844) 871-3169 to book.
Schedule Your Chimney Inspection Service in Elmhurst Today
If it’s been a while since anyone looked at your chimney, now’s the time to book an Elmhurst Chimney Sweep visit and get a clear answer about what your chimney actually needs. We’ll inspect it properly, show you the camera footage, and give you a free written estimate with nothing you don’t need. Call (844) 871-3169. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Elmhurst Chimney Sweep.