Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Hollis
If your Hollis home has a cap that’s rattling loose or a crown that’s crumbling into the flower bed, you’re looking at work that needs to happen before the next freeze. We work on the cap and crown line of chimney care across Hollis, from the detached frame and brick houses off Hollis Avenue to the older stacks near the Long Island Rail Road tracks, and we know this neighborhood’s chimneys are a different animal than what you’d find in newer construction. The cap and crown are the first line of defense for the whole stack. When they fail, water gets in, mortar gives way, and the damage moves down fast. Call (844) 871-3169 and we’ll get a technician out with a camera, not a sales pitch.

Why Hollis Homeowners Call Elmhurst Chimney Sweep for Chimney Cap & Crown
We’re a chimney-only operation. Cap installation, crown repair, crown coating, liner work, sweeping, and fireplace repair all fall under one trade here, which means the person who inspects your crown is the same specialist who knows how to rebuild it. That matters in Hollis, where a lot of the caps and crowns we see sit on chimneys that are 70 to 90 years old and were never built for the way people heat today.
Our technicians have up to 9 years of experience, and we work with a set of professional-grade suppliers the trade recognizes: Gelco, Famco, and Olympia Chimney for cap and crown components, and HeatShield for ceramic flue resurfacing when a liner is compromised but not gone. We don’t stock parts in your driveway and we don’t own trucks – we connect you to a vetted local professional who handles the job with the right materials. What we do insist on is evidence. Nothing gets recommended without camera footage of your flue and crown that you can see yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Hollis
Cap Installation in Hollis
A correctly sized cap keeps rain, birds, and squirrels out of the flue while letting smoke and gases escape cleanly. In Hollis, where stacks often rise between adjacent houses, we pay close attention to clearance and to the neighbor’s side of the shared pier. A loose or missing cap here isn’t just your problem; a failed flue can push smoke into the neighboring attic through unsealed party-wall masonry.
Cap Replacement in Hollis
Older caps on Hollis homes are usually galvanized steel that’s rusted through at the seams, or a homemade screen job that stopped fitting years ago. Replacement is straightforward once we’ve confirmed the flue is sound underneath. We won’t swap a cap onto a cracked clay-tile liner and call it done; you’ll see the liner footage first, and we’ll tell you plainly whether it can wait.
Crown Repair in Hollis
The crown is the concrete or mortar cap at the very top of the stack that sheds water away from the brick. On Hollis’s 70- to 90-year-old chimneys, crowns crack and spall from repeated freeze-thaw cycles, and once water gets into the masonry it rusts the damper and works its way down the flue. Crown repair rebuilds that slope so water runs off instead of soaking in.
Crown Coating in Hollis
When a crown has surface cracks but the structure is still sound, a flexible coating can seal it and buy years of service at a fraction of a rebuild. It’s a common solution on the weathered brick stacks you see throughout Hollis. We only recommend it when the crown passes inspection, and we’ll show you what we see before you commit.
Need a multi-flue or custom cap for a wider stack? Our chimney cap & crown team builds those to fit, and we’ll walk you through the options.
Trusted Brands We Service in Hollis
The cap and crown components we specify come from Gelco, Famco, and Olympia Chimney, brands built for chimney applications rather than repurposed hardware. When a crown or cap sits on top of a compromised liner, we bring in HeatShield ceramic resurfacing or a DuraFlex liner system to restore safe draft and containment before the cap goes back on. We don’t keep stock in Hollis and we don’t run inventory out of a shop, so parts come through our supplier relationships and the job is scheduled around that. What it means for you is that the materials matched to your chimney are the ones the trade uses, not whatever’s cheapest that week.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Hollis Homes
- Cracked and spalled crowns on old stacks. Hollis’s humid continental climate sends chimneys through repeated freeze-thaw every winter. Each cycle widens hairline cracks, and water gets into the brick, then into the damper hardware.
- Deteriorated clay-tile liners sold as a reline job. Original clay tile in Hollis homes cracks over time, but not every crack means a full reline. Without camera evidence, homeowners get upsold on liner work a HeatShield coating could handle.
- Party-wall chimneys with no cap or seal. Many Hollis stacks rise between neighboring houses without a proper cap or sealed flue. A failed flue in one home can push creosote-stained smoke into the neighbor’s attic through unsealed masonry.
- Rusted dampers from summer humidity and winter water intrusion. The same humid summers that make Hollis feel sticky in July work on older metal dampers and firebox hardware. A failing crown lets water in and speeds that rust along.
Here’s the part that only applies on Hollis blocks. The shared brick piers between neighboring houses mean a deteriorated flue isn’t a single-property problem. When a crown fails on one side, smoke and carbon monoxide can migrate through unsealed party-wall masonry into the attic next door. A homeowner often notices it as a faint smoke smell in the neighbor’s attic, not in their own living room. That cross-property path is far less common in suburban settings with freestanding chimneys, and it’s why we cap and seal the full pier, not just the flue that’s in use. It’s also why we insist on camera documentation before any recommendation: you need to see the condition of your liner and crown, and so does your neighbor.
Pricing for Chimney Cap & Crown in Hollis, NY
These are typical Hollis ranges, and the written estimate sets the final price. A standard single-flue cap installation generally runs $225 to $475. Cap replacement with a properly sized multi-flue unit lands in the $350 to $750 range. Crown repair, where the top of the stack is rebuilt and resloped, typically runs $450 to $1,100 depending on access and the size of the stack. Crown coating for a sound crown with surface cracking runs $300 to $650. What moves the number: the height and condition of the stack, shared-pier access between houses, and whether the liner underneath is sound. Camera inspection is part of the estimate, and there’s no charge for it. Call (844) 871-3169 for your free estimate.
We Also Serve Cities Near Hollis
We work the quieter single-family streets of Hollis and the surrounding neighborhoods, including Fresh Meadows, Briarwood, Kew Gardens, and Forest Hills. If your chimney sits on a shared pier or a freestanding stack, we’ll bring the camera and tell you what your crown and cap actually need before anything gets scheduled.
Serving Hollis, NY – Our Local Coverage Area
We serve Hollis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Hollis
Yes. A properly fitted cap seals your flue while leaving the neighbor’s flue and the brick pier between you untouched. We measure each flue separately and build the cap to your opening, so the shared masonry isn’t modified and the neighbor’s side stays sealed as it was. If the pier itself is unsealed, we’ll flag it and let you decide. Call (844) 871-3169 for a free estimate.
That call comes down to camera evidence, not a visual from the ground. A HeatShield ceramic coating can restore a liner with cracks and gaps as long as the tile still holds its shape and the structure is sound; a full DuraFlex reline is needed when tiles are displaced, missing, or the flue is unlined. We run the camera, show you the footage, and explain which option your liner calls for. Call (844) 871-3169 and we’ll schedule the inspection.
Smoke is likely escaping through unsealed party-wall masonry between your flue and theirs. On Hollis’s shared brick piers, a cracked liner or an uncapped flue can push creosote-stained smoke and carbon monoxide through the shared stack into the adjacent attic. The fix starts with documenting which flue is leaking, then capping and sealing the affected side. This is a safety issue, not a nuisance. Call (844) 871-3169 to get it identified.
Yes. Even light use in a Hollis home with a 70- to 90-year-old crown and clay-tile liner leaves room for freeze-thaw cracking and water intrusion you can’t see from the ground. An annual camera inspection catches crown and liner wear before it becomes a rebuild, and it gives you a baseline to compare against next year. Call (844) 871-3169 for your inspection and free estimate.
The crown is the masonry top of the stack that sheds water; the cap is the metal cover over the flue opening that blocks rain and animals. Your Hollis home likely needs both evaluated, since a sound cap on a spalled crown still lets water into the brick. We inspect the crown first, then size the cap to the flue opening. Call (844) 871-3169 for a free estimate.
Ready to get your Hollis chimney sorted? Call (844) 871-3169 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll see the camera footage before anything is recommended, and you’ll know exactly which cap or crown repair your chimney needs.
Written by the team at Elmhurst Chimney Sweep.