Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Corona
If you own a rowhouse in Corona, your chimney is doing more work than you probably realize. It vents a furnace, maybe a water heater, and often a fireplace that gets lit a few times a year. We inspect chimneys across Corona, from the dense blocks off Roosevelt Avenue to the quieter streets near Flushing Meadows Corona Park, and we know what these older brick stacks look like from the roof down. A proper inspection tells you whether what’s inside the chimney is safe, and it tells you before a small crack becomes a real problem. Call (844) 871-3169 to book. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Corona Homeowners Call Elmhurst Chimney Sweep for Chimney Inspection
Corona homeowners tend to call us because a neighbor recommended us, or because a chimney sweep who only cleans couldn’t answer their questions. We’re a chimney and fireplace specialist, not a general contractor adding chimney work to a list of other trades. Every job we take on, from an inspection to a HeatShield flue resurfacing, stays inside one focused trade.
That matters in Corona specifically. When we look at a chimney on a two-family brick row, we’re not checking one appliance’s venting. We’re checking a shared masonry structure that several apartments depend on. The inspection you get here should reflect that.
We serve Corona along with the rest of our service area, and homeowners in the neighborhood have come to expect straight answers about what their chimney actually needs, nothing more and nothing less. Our technicians have up to 9 years of experience working on this kind of housing stock. If you’ve had a sweep tell you the flue is “probably fine” without putting a camera in it, that’s a conversation worth having.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Corona
An inspection is the starting point for everything else we do. In Corona, the inspection we recommend most often is a Level 2 with a camera run, because the shared-flue construction of these rowhouses hides problems that a visual check from the firebox can’t reach. Here’s how our inspection services break down.
Level 1 Inspection
A Level 1 is the basic yearly check: we look at the accessible portions of the chimney, the firebox, the damper, and the venting connections, and confirm nothing has shifted since the last visit. For a Corona homeowner who burns regularly and hasn’t changed anything about the system, this is often enough. It’s also the right inspection before a seasonal cleaning.
Level 2 Inspection
A Level 2 goes further, including a camera run through the flue and a closer look at the crown, flashing, and the mortar joints above the roofline. We recommend it for Corona rowhouses whenever a property changes hands, after a chimney fire, or any time the appliance or fuel type changes. In an attached brick row, it’s also how we check whether one apartment’s flue is leaking into another’s.
Level 3 Inspection
A Level 3 is a targeted inspection that may require opening a wall or removing part of the chimney to reach a concealed problem. It’s rare, and we only recommend one when a Level 1 or Level 2 has already turned up evidence that something specific, and specific to Corona’s older masonry, needs to be looked at directly. You’ll know why before anyone touches anything.
Camera Inspection
Our camera inspection sends a video scope down the flue so we can see the condition of the flue tiles, the joints between them, and any gaps or offsets. In Corona, this is the step that catches cross-contamination between adjoining units, because the cracks that let exhaust cross over are almost never visible from the firebox. You see the footage. We talk through what it shows.
Flue inspection and real estate inspection round out the menu for Corona buyers and sellers who need documentation before closing. Whatever level you need, the written report comes with the photos and the reasoning behind each recommendation. If you’d like to see how our chimney inspection service works in general, that page covers the process in detail.
Trusted Brands We Service in Corona
The repair products we recommend are the same professional-grade materials certified chimney specialists use nationwide. For relining a compromised flue in a Corona rowhouse, that’s often a DuraFlex liner system. For resurfacing a flue interior that’s pitted but still structurally sound, it’s HeatShield ceramic. For caps and crowns, we work with Gelco and Olympia Chimney components built specifically for chimney applications. We don’t claim to stock any of this locally. What we do is specify the right product for your chimney and arrange the work through the vetted local professionals who install it.
Common Chimney Inspection Problems We See in Corona Homes
These are the issues that come up again and again when we inspect chimneys in Corona’s attached brick rows.

- Shared flues leaking between apartments. When one brick stack serves two units, a cracked flue tile can push smoke or carbon monoxide into the neighbor’s channel. Camera inspection is the only reliable way to catch it before it becomes a health problem.
- Chimneys from the 1900s to 1940s with no modern liner. Many original Corona chimneys were built with bare brick or clay tiles with no liner. Freeze-thaw winters open the mortar joints and spall the brick long before the homeowner notices water getting in.
- Crown and flashing cracks letting spring rain in. Heavy spring rain finds unsealed cracks around the crown and flashing and soaks the flue liner. The result often reads as a “damp smell” indoors when the real problem is a draft failure.
- Creosote hiding behind a rarely-used fireplace. A fireplace that sees a few fires a year still builds creosote, and in a chimney that also serves the furnace, the glaze can go undetected for seasons. A sweep and inspection catches it.
Pricing for Chimney Inspection in Corona, NY
Inspection pricing in Corona sits in the same range as the rest of Queens, though a Level 2 on a shared multi-unit stack can run toward the higher end. A typical Level 1 inspection in Corona runs $125 to $225. A Level 2 inspection with a camera run typically runs $200 to $400, and a Level 3, when it’s needed, usually runs $400 to $900 depending on what has to be opened up. A standalone camera or flue inspection often runs $150 to $300. What moves the number is the number of flues on the stack, roof access, and whether we’re working on a single-family house or a shared two- or three-family brick row. Every job is priced by a written estimate before any work starts, and the estimate is free.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Corona
Corona is part of a service area that includes the surrounding Queens neighborhoods. We also work in Elmhurst, Rego Park, Jackson Heights, and East Elmhurst, and the housing stock across those areas is similar enough that what we learn on one block usually applies on the next. If you’re just outside Corona, call and we’ll confirm coverage. You can read more about how we serve Corona and the neighborhoods around it.
The Shared-Masonry Problem in Corona Chimneys
Here’s what makes a Corona inspection different from a checklist written for a single-family house. In the attached two- and three-family brick rows that dominate this neighborhood, one chimney stack frequently serves two apartments’ appliances plus a fireplace that gets used a few times a year. The flues run side by side inside the same brick mass. When a flue tile cracks, one unit’s exhaust can cross into a neighboring channel, and the first sign is often smoke staining on the shared brick and mortar joints rather than anything the homeowner inside can see.
In a typical Corona attached rowhouse, an inspector arrives to find a chimney stack serving both a basement furnace and a seldom-used fireplace, with separate flue tiles for different apartments in the same brick mass. Probing the mortar often turns up spalling joints and a missing or degraded flue liner. A Level 2 camera run through the flue reveals cracks or gaps where one unit’s exhaust can cross into a neighbor’s channel, visible as smoke staining on the shared brickwork. The usual fix is isolating the flues, sealing or relining the compromised channel with a HeatShield product or a DuraFlex liner, and resetting the chimney crown and flashing so spring rain stops feeding the cracks.
The climate works against these chimneys too. Corona’s humid summers and freeze-thaw winters accelerate spalling of older brick and open the mortar joints, and heavy spring rain exposes any crack that’s already there. A chimney that looked fine in October can be taking on water by April. That’s why we push for a camera inspection on these shared stacks rather than a look from the firebox.
Serving Corona, NY – Our Local Coverage Area
We serve Corona and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Corona
Because a Level 1 can’t see inside a shared flue. The camera run in a Level 2 is what reveals cracks and gaps where exhaust crosses between adjoining units, and in a Corona attached row that’s the risk a Level 1 simply isn’t built to catch. Call (844) 871-3169 for an exact quote on a Level 2. Estimates are free.
Yes. When one brick stack serves two apartments, a cracked or offset flue tile can push smoke from one unit’s appliance into the other’s channel, and the smell is often the first sign. A camera inspection confirms it. Call (844) 871-3169 to book one and get an exact quote. Estimates are free.
Yes, because the chimney likely still vents your furnace or water heater. In many Corona rowhouses the fireplace sits unused while the same stack carries combustion gases from heating equipment, and that venting needs to be checked for cracks and blockages regardless of whether anyone lights a fire. Call (844) 871-3169 for an exact quote. Estimates are free.
You can’t tell by looking from the firebox, and that’s the honest answer. Glazed creosote builds in stages, and the degree that needs professional removal versus a routine sweep is something a technician confirms with a camera. If you’re unsure, book an inspection. Call (844) 871-3169 for an exact quote, and estimates are free.
Often, yes. Water showing up inside after heavy spring rain frequently traces to an unsealed crack around the crown or flashing, which lets rain soak the flue liner and can mask a draft problem as a simple damp smell indoors. An inspection confirms where it’s coming in. Call (844) 871-3169 for an exact quote. Estimates are free.
Book Your Corona Chimney Inspection
Whether you’re in a two-family brick row off Roosevelt Avenue or a semi-detached house closer to the park, the first step is the same: get eyes on the inside of the stack. We’ll tell you what your chimney actually needs, nothing more and nothing less, and if the work can safely wait, we’ll say so. Call (844) 871-3169 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Written by the team at Elmhurst Chimney Sweep.